HC-FL

More than just two single-interval scales: the 3-in-1 solution for greater throughput

The HC-FL catchweigher is a combination of two single-interval scales in line. Both scales work simultaneously and independently of each other. As soon as a parcel exceeds a certain length, both single-interval scales work together as a virtual third set of scales. The machine is ideal for applications where high belt speeds and top throughputs are required for products individually weighing up to 60 kg – perfect for the CEP sector.

+ Read more- Show less

The scales weigh precisely up to 11,000 parcels an hour at transport speeds of up to 2.9 m/s. The scales impress with firstclass performance and durability. More than 1,000 systems have been put into operation worldwide to date. The HC-FL from WIPOTEC-OCS is therefore setting new standards in its sector.

The construction principle offers around 60 % more throughput at the same speed compared to single-interval scales. Using two single-interval scales enables the shortest possible product gaps. The catchweigher can also weigh during acceleration and decelaration phases, and on ascending or descending slopes. The use of a high-tech weigh cell from WIPOTEC, which works on the principle of electro-magnetic force restoration (EMFR), guarantees the best technology for excellent weighing results.

Key Features

  • Transport speeds up to 2.9 m/s
  • Weighing range up to 60 kg
  • Accuracy above +/- 50 g
  • Two single-interval scales which, if required, can be combined to simulate a third set of virtual scales
  • Low noise level not exceeding 65 dB

Your Benefits

  • Throughput increase of up to 60 % compared to single-interval scales
  • Very good price/performance ratio
  • WIPOTEC EMFR weigh cell for the best weighing results
Product finder

3 steps to your solution

Your request

Any questions regarding this product?

Technical Dimensions

Technical Data

Application CEP, mail order, intralogistics, industry
Machine type HC-FL-2
Max. transport speed2.9 m/s
Control cabinet voltage; operating voltageL1/N/PE; 230V/115V; 480V-380V
Operating frequency 50/60 Hz
Working height 1) 450-1.250 mm
Weighing belt width800/900/1.000 mm
Weighing belt length800/900/1,000/1,100/1,200/1,300/1,400/1,500/1,600 mm
Protection classIP54
Min. calibration value (e) ≥ 50 g
Max. weighing range60 kg

Explanation of footnotes

  1. Other working heights by request
Product finder

3 steps to your solution

This website uses cookies. By using this website, you agree to the placement of cookies. More information

Accept